Auto Steering Knuckle Guide
The steering knuckle is one of the important parts in the steering axle of the car, which can make the car run stably and transmit the driving direction sensitively.
The function of the steering knuckle is to transmit and bear the load of the front part of the car, support and drive the front wheel to rotate around the kingpin to turn the car. When the car is in motion, it is subjected to variable impact loads, so it is required to have high strength

The steering knuckle is the hinge for wheel steering, generally in the shape of a fork. The upper and lower forks have two coaxial holes for installing the kingpin, and the steering knuckle journal is used to install the wheel.
The two ears of the pin hole on the steering knuckle are connected to the fist-shaped part at both ends of the front axle through the kingpin, so that the front wheel can deflect a certain angle around the kingpin to turn the car.
In order to reduce wear, a bronze bushing is pressed into the pin hole of the steering knuckle, and the bushing is lubricated by injecting grease with a nozzle installed on the steering knuckle.
In order to make the steering flexible, a bearing is installed between the lower ear of the steering knuckle and the fist-shaped part of the front axle. An adjustment gasket is also installed between the upper ear of the steering knuckle and the fist-shaped part to adjust the gap between them.
